Diamond, cubic boron nitride (CBN) grinding wheel is characterized by high hardness, high thermal conductivity, high sharp grinding the resulting high rate. For modern industrial machining efficient, powerful grinding. Use high-tech means to make vitrified not only to maintain its original performance of hard and brittle, and low sintering temperature, high sanding roll strength, high toughness, holding abrasive performance is good, and with heat, oil, water, acid, since sharp, and can be trimmed, trimming long interval, a uniform porosity, easy cooling, chip and so on. In the grinding process is not blocked, do not burn the workpiece, and iron group elements can not afford chemical changes were inert, reducing the workpiece in the grinding fatigue, increased life of the workpiece, thereby improving the quality of workpiece roughness , efficiency, and automation of machining a workpiece, to reduce overall costs.
Abrasives choice
Abrasive shape and appearance shall be sanding paper roll chosen depending on the user's machine tools and workpieces to determine the requirements for abrasive, please reference standards when designing the shape and dimension tables, try to select standard shapes and sizes.
Note: When selecting a new abrasive, we also need to provide the following technical information so that abrasive cloth belt we can grasp your requirements
Workpiece material, grade and hardness of the surface roughness machine type wire-speed grinding wheel depth (micron / single stroke) grinding allowance (mm) Cooling (dry grinding / wet) Ceramic diamond wheel can be drawn according to the literal meaning of a combination of diamond and ceramic became a ceramic diamond wheel. This is compared to an ordinary wheel. Grinding of the more powerful, low temperature in the grinding time, reduce the number of the degree of wear. Will not cause damage to the product. Good heat dissipation, repair when convenient. Currently abroad this ceramic diamond wheel has gradually increased.
没有评论:
发表评论