Tips on using disc sand

 Sandpaper dipped in water or soapy water and water can be polished during

operation can reduce the wear scar, creamy ahead of the coating, and thrifty

servant material is not difficult. But  narrow belt the mill should be lower face painting

and coating ability to wait underlying paint layer after complete dry mill,

otherwise it is easy to paint white, absorbent substrates without some

initiative mill, in order to protect the disc with sandpaper quality of work,

before grinding to polishing tools should be tested.
    Sandpaper in subsistence use of sanding paper roll  all sizes are too hearty, whether it is

plastic industry, metal industry, construction industry or the automotive

industry are operating very widespread. Request for the operation of various

industries in each sandpaper does not vary, some characteristics comply with

grinding tools, and some sandpaper to comply with the shape, material

characteristics, such as differences optional sandpaper. It is also a

sandpaper disc sand in one species, but the sand is due to the preparation of

the disc appearance and operation of metal cutting wheel divergent samples, so just give it name

from scratch, with the addition of a sandpaper is also referred to.
    Sand may be divided into two types of discs, and the non-porous

perforated disc sandpaper sandpaper disc, a perforated disc sand to

facilitate the discharge of waste in the grinding object debris from the

hole, advance grinding efficiency. If the disc sand sticking to the speed

change master disc, the special operating machinery or hand, using sandpaper

polished, mostly for hard and brittle paint kind of grinding, end compared

with convenient operation, but disc sand in operation The process will

produce a lot of dust, affecting the health scene, which is dominated disc

sand to prevent a fragmentation weaknesses problems.